Availability
6Time to ship
Technical Data
- Typ silnika: Czterosuwowy, chłodzony powietrzem
- Wymiary: 750 x 1490 x 910 mm
- Zasilanie: Spalinowe
- Prędkość obrotowa: 70-140 obr./min
- Zużycie paliwa: 1,4 l/h / 3600 obr-1
Description
Toolsa TPT-600 Edge Power Trowel with a Honda GX 160 Engine
This is the same TPT-600 design with a 600 mm working diameter that you know from the Rato version, driven by a Honda GX 160 engine rated at 3.6 kW (4.8 HP). We build it for companies whose fleet already runs on Honda GX engines and who want to service all of them with one set of parts and one routine. The more powerful Rato R210 version (7 HP) has its own product page.
Honda GX 160 engine
The engine has a displacement of 163 cm³, 3.6 kW (4.8 HP) at 3600 rpm and 10.3 Nm of torque at 2500 rpm. The fuel tank holds 3.1 l of unleaded petrol and the crankcase 0.6 l of oil. An oil level sensor stops the engine before the oil drops below a safe level.
Run time on one tank
At full throttle the GX 160 burns about 1.4 l/h, so a full tank lasts more than 2 hours of continuous troweling, and longer at lower speeds. The air filter has a paper element and a foam pre-filter that stops site dust.
Working along walls
A rotating guard ring with a rubber bumper guides the machine along a wall without scratching it. You change the blade pitch with a knob at the back while you work, and set the rotor speed in the 70–140 rpm range with the throttle lever.
Safety and transport
A centrifugal switch stops the engine if the machine slips out of your hands. With the chromed handle folded, the 750 x 1490 x 910 mm machine fits in an estate car, and a 600 mm trowel pan is included.
Engine parts and accessories
Blades and pans are in the trowel blades and float pans category, and other machines in walk-behind power trowels. Need an air filter or starter rope for the GX 160? Write to us.
Product Details
Indeks:
- Typ silnika
- Czterosuwowy, chłodzony powietrzem
- Wymiary
- 750 x 1490 x 910 mm
- Zasilanie
- Spalinowe
- Prędkość obrotowa
- 70-140 obr./min
- Zużycie paliwa
- 1,4 l/h / 3600 obr-1
- Paliwo
- Benzyna bezołowiowa
- Pojemność zbiornika paliwa
- 3,1 l
- Moc silnika
- 3,6 kW (4,8 KM)
- Ilość łopatek
- 4 szt.
- Średnica zacierania
- 600 mm
- Pojemność oleju silnikowego
- 0,6 l
- Pojemność silnika
- 163 cm³
Questions and answers
Why is the TPT-600 available with a Honda GX 160 engine?
We prepared the Toolsa TPT-600 with a Honda GX 160 engine for companies that already run machines with Honda GX engines: plate compactors, saws, pumps or generators. One engine type across the whole fleet means shared air filters, spark plugs, starter ropes and the same service routine. The GX 160 has a displacement of 163 cm³ and delivers 3.6 kW (4.8 HP), which is enough for floating and finishing floors with a 600 mm pan. The trowel itself is the same as the version with the Rato R210 (7 HP) engine.
How long does a tank of fuel last in the TPT-600 with a Honda engine?
The Honda GX 160 engine in the Toolsa TPT-600 burns about 1.4 l of petrol per hour at 3600 rpm, which is full throttle. The 3.1 l tank therefore lasts for more than 2 hours of continuous work, and longer at lower speeds. The engine is a four-stroke unit that runs on plain unleaded petrol with no oil mixed into the fuel. On larger floors keep a jerrycan on site so you do not have to stop troweling when the concrete reaches the right hardness.
What does the oil level sensor on the GX 160 engine do?
The Honda GX 160 engine in the Toolsa TPT-600 has an oil level sensor that stops the engine when the oil drops below a safe level and prevents restarting until it is topped up. The crankcase holds 0.6 l of oil. The sensor protects the engine from seizing, but it does not replace a daily check: check the oil level before every start, because the trowel often works slightly tilted, and an engine that stops suddenly mid-pass can leave a mark on the floor.
What torque does the Honda engine in the TPT-600 deliver?
The Honda GX 160 engine delivers 10.3 Nm of torque at 2500 rpm and 3.6 kW (4.8 HP) at 3600 rpm. In the Toolsa TPT-600 the drive reduces the engine speed to 70–140 rpm at the 4-blade rotor, so the torque is enough for floating with the 600 mm pan and for finishing with a steeper blade pitch. On very dense, well-set concrete, the version with the Rato R210 engine rated at 5.1 kW (7 HP) gives a bigger power reserve.
How do you look after the air filter on the TPT-600 with a Honda engine?
The air filter of the Honda GX 160 engine in the Toolsa TPT-600 has two elements: a paper element and a foam pre-filter. On site cement dust clogs it quickly, so wash and dry the foam element every few days of work, and knock out the paper element and replace it when it is damaged or permanently dirty. A clogged filter cuts engine power and raises fuel use, which is about 1.4 l/h at full throttle. It is worth keeping a spare element together with spare blades.
What comes with the TPT-600 with a Honda engine?
The Toolsa TPT-600 with a Honda GX 160 engine comes with a 4-blade rotor and a 600 mm trowel pan, ready for its first floor. The machine has a folding chromed handle, a rotating guard ring with a rubber bumper, a blade pitch knob, a throttle lever and a centrifugal safety switch. Its 750 x 1490 x 910 mm dimensions let you carry it in an estate car. Spare blades and pans are in our trowel parts category.
3 other products in the same category:
-
Toolsa TPT-900R10 Petrol Power Trowel (Rato R300, 10 HP)
zł6,148.77 tax incl. 4999,00 zł tax excl. -
Toolsa TPT-600 Petrol Edge Power Trowel (Rato R210 | 7 HP)
zł4,920.00 tax incl. 4000,00 zł tax excl. -
Toolsa TPT-900R7 Petrol Power Trowel (Rato R210, 7 HP)
zł5,535.00 tax incl. 4500,00 zł tax excl.